Skip to content

MOT reliability

Bmw 80csi

1 vehicles · 3 completed MOT tests analysed
33%
MOT pass rate

Based on 1 Bmw 80csi vehicles and 3 completed MOT tests, the Bmw 80csi has an overall 33% pass rate, with an average recorded mileage of 25,537 miles.

1
Vehicles
3
MOT tests
6
Faults per test
0%
Dangerous-fault share

Bmw 80csi problem areas

Where faults occur most across all Bmw 80csi MOT tests:

  • Other83%
  • Tyres, wheels & suspension11%
  • Brakes11%
  • Body & structure6%
  • Emissions & nuisance6%

Fuel types: Petrol (1)

Most common Bmw 80csi MOT faults

These are the faults and advisories recorded most often across Bmw 80csi MOT tests:

  1. Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) (2 times)
  2. Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) (1 times)
  3. Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) (1 times)
  4. Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) (1 times)
  5. Nearside Suspension component mounting prescribed area is inadequately repaired (2.4.A.3) (1 times)
  6. Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) (1 times)
  7. Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) (1 times)
  8. Front Driver's seat cannot be secured in the upright position. (6.2.A.2) (1 times)
  9. Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6) (1 times)
  10. Nearside Front passenger seat cannot be secured in the upright position. (6.2.4) (1 times)
  11. Nearside Front wheel bearing has slight play (2.5.A.3c) (1 times)
  12. Nearside Headlamp aim too low (1.8) (1 times)
  13. Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6) (1 times)
  14. Offside Front wheel bearing has slight play (2.5.A.3c) (1 times)
  15. Offside Headlamp aim too low (1.8) (1 times)

Bmw 80csi pass rate by registration year

YearVehiclesTestsPass rateAvg mileage
1974 1 3 33% 25,537

Bmw 80csi reliability FAQ

Across 1 Bmw 80csi vehicles in our MOT data, 33% pass the MOT (a 67% failure rate), with about 6 faults or advisories recorded per test.

The most frequently recorded Bmw 80csi MOT issues are: Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3); Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings (6.1.B.2); Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2).

The typical Bmw 80csi in our data has covered around 25,537 miles.

Compare the Bmw 80csi

See how the Bmw 80csi stacks up against other Bmw models on MOT reliability:

80csi vs 3 series 80csi vs 118 80csi vs 316 80csi vs 520

Check a specific Bmw 80csi

Enter a registration to see that exact vehicle's full MOT history, advisories and recurring faults.

See all Bmw models · Learn about common MOT failures · what an MOT checks