MOT reliability
Ford 130
4 vehicles · 14 completed MOT tests analysed
43%
MOT pass rate
Based on 4 Ford 130 vehicles and 14 completed MOT tests, the Ford 130 has an overall 43% pass rate, with an average recorded mileage of 82,532 miles.
4
Vehicles
14
MOT tests
3,365
Avg miles / year
4.9
Faults per test
0%
Dangerous-fault share
Ford 130 problem areas
Where faults occur most across all Ford 130 MOT tests:
-
Other90%
-
Emissions & nuisance6%
-
Tyres, wheels & suspension6%
-
Seatbelts & equipment3%
-
Brakes3%
Ford 130 pass rate by age
| Age (years) | Tests | Pass rate |
|---|---|---|
| 10 | 2 | 50% |
| 11 | 4 | 50% |
| 15 | 2 | 50% |
| 16 | 3 | 33% |
| 17 | 2 | 50% |
| 18 | 1 | 0% |
Fuel types: Diesel (4)
Most common Ford 130 MOT faults
These are the faults and advisories recorded most often across Ford 130 MOT tests:
- Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) (5 times)
- Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) (5 times)
- Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) (3 times)
- Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3) (3 times)
- Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1) (3 times)
- Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1) (3 times)
- Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) (2 times)
- Offside Windscreen washer provides insufficient washer liquid (8.2.3) (2 times)
- Exhaust has a major leak of exhaust gases (7.1.2) (2 times)
- Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3) (2 times)
- Nearside Headlamp insecure (1.7.3) (2 times)
- Seat belt anchorage prescribed area is excessively corroded (5.2.6) (2 times)
- Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) (2 times)
- Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3) (2 times)
- Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3) (2 times)
Ford 130 pass rate by registration year
| Year | Vehicles | Tests | Pass rate | Avg mileage |
|---|---|---|---|---|
| 1996 | 1 | 4 | 50% | 80,118 |
| 1995 | 1 | 2 | 50% | 187,822 |
| 1991 | 1 | 2 | 50% | 26,717 |
| 1990 | 1 | 6 | 33% | 35,472 |
Ford 130 reliability FAQ
Across 4 Ford 130 vehicles in our MOT data,
43% pass the MOT (a 57% failure rate), with about
4.9 faults or advisories recorded per test.
The most frequently recorded Ford 130 MOT issues are:
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3); Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3); Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3).
The typical Ford 130 in our data has covered around
82,532 miles.
Compare the Ford 130
See how the Ford 130 stacks up against other Ford models on MOT reliability:
Check a specific Ford 130
Enter a registration to see that exact vehicle's full MOT history, advisories and recurring faults.
See all Ford models · Learn about common MOT failures · what an MOT checks