Skip to content

MOT reliability

Ford F250 heavy duty

3 vehicles · 47 completed MOT tests analysed
83%
MOT pass rate

Based on 3 Ford F250 heavy duty vehicles and 47 completed MOT tests, the Ford F250 heavy duty has an overall 83% pass rate, with an average recorded mileage of 145,535 miles.

3
Vehicles
47
MOT tests
6,064
Avg miles / year
3.6
Faults per test
1%
Dangerous-fault share

Ford F250 heavy duty problem areas

Where faults occur most across all Ford F250 heavy duty MOT tests:

  • Other47%
  • Brakes15%
  • Lamps & electrical11%
  • Body & structure9%
  • Tyres, wheels & suspension9%
  • Emissions & nuisance4%
  • Steering4%
  • Identification & plates4%

Ford F250 heavy duty pass rate by age

Age (years)TestsPass rate
31100%
51100%
61100%
71100%
81100%
9475%
102100%
11475%
122100%
13367%
14367%
151100%
162100%
172100%
18367%
192100%
202100%

Fuel types: Diesel (3)

Most common Ford F250 heavy duty MOT faults

These are the faults and advisories recorded most often across Ford F250 heavy duty MOT tests:

  1. Oil leak, but not excessive (8.4.1 (a) (i)) (7 times)
  2. Front Registration plate deteriorated but not likely to be misread (0.1 (b)) (5 times)
  3. Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i)) (4 times)
  4. Nearside Front Direction indicator slightly discoloured (4.4.3 (a)) (4 times)
  5. Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i)) (4 times)
  6. Offside Front Direction indicator slightly discoloured (4.4.3 (a)) (4 times)
  7. Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i)) (4 times)
  8. Hazard warning lamps flashing more than 120 times a minute (3 times)
  9. Parking brake efficiency low - 16% (3 times)
  10. Track rod end ball joint has slight play All (2.1.3 (b) (i)) (3 times)
  11. Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i)) (3 times)
  12. Parking brake: efficiency below requirements (3.7.B.7) (2 times)
  13. Front Brake pad(s) wearing thin (3.5.1g) (2 times)
  14. Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i) (2 times)
  15. offside front outer hook joint badly worn (2 times)

Ford F250 heavy duty pass rate by registration year

YearVehiclesTestsPass rateAvg mileage
2005 1 16 100% 162,852
1997 2 31 74% 136,877

Ford F250 heavy duty reliability FAQ

Across 3 Ford F250 heavy duty vehicles in our MOT data, 83% pass the MOT (a 17% failure rate), with about 3.6 faults or advisories recorded per test.

The most frequently recorded Ford F250 heavy duty MOT issues are: Oil leak, but not excessive (8.4.1 (a) (i)); Front Registration plate deteriorated but not likely to be misread (0.1 (b)); Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i)).

The typical Ford F250 heavy duty in our data has covered around 145,535 miles.

Compare the Ford F250 heavy duty

See how the Ford F250 heavy duty stacks up against other Ford models on MOT reliability:


Check a specific Ford F250 heavy duty

Enter a registration to see that exact vehicle's full MOT history, advisories and recurring faults.

See all Ford models · Learn about common MOT failures · what an MOT checks