Skip to content

MOT reliability

Hyundai S coupe injection se a

47 vehicles · 43 completed MOT tests analysed
70%
MOT pass rate

Based on 47 Hyundai S coupe injection se a vehicles and 43 completed MOT tests, the Hyundai S coupe injection se a has an overall 70% pass rate, with an average recorded mileage of 79,906 miles.

47
Vehicles
43
MOT tests
5,791
Avg miles / year
2.1
Faults per test
0%
Dangerous-fault share

Hyundai S coupe injection se a problem areas

Where faults occur most across all Hyundai S coupe injection se a MOT tests:

  • Other111%
  • Steering14%
  • Emissions & nuisance5%
  • Brakes3%

Hyundai S coupe injection se a pass rate by age

Age (years)TestsPass rate
92100%
101070%
111471%
121173%
13540%
141100%

Fuel types: Petrol (47)

Most common Hyundai S coupe injection se a MOT faults

These are the faults and advisories recorded most often across Hyundai S coupe injection se a MOT tests:

  1. Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d) (6 times)
  2. Offside Front Brake pipe slightly corroded (3.6.B.2c) (4 times)
  3. Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5) (3 times)
  4. Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5) (3 times)
  5. Exhaust has part of the system slightly deteriorated (7.1.1a) (3 times)
  6. Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d) (3 times)
  7. Nearside Body has slight corrosion (6.1.B.2) (3 times)
  8. Nearside Rear Brake pipe slightly corroded (3.6.B.2c) (3 times)
  9. Offside Body has slight corrosion (6.1.B.2) (3 times)
  10. Nearside Rear Tyre worn close to the legal limit (4.1.E.1) (3 times)
  11. Nearside Rear Stop lamp not working (1.2.1b) (2 times)
  12. Offside Rear Brake pipe excessively corroded (3.6.B.2c) (2 times)
  13. Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5) (2 times)
  14. Nearside front lower arm rear bracket slight damaged (2 times)
  15. Offside Front Shock absorber has a slightly reduced damping effect (2.7.5) (2 times)

Hyundai S coupe injection se a pass rate by registration year

YearVehiclesTestsPass rateAvg mileage
1996 7 32 66% 88,369
1995 3 11 82% 60,159

Hyundai S coupe injection se a reliability FAQ

Across 47 Hyundai S coupe injection se a vehicles in our MOT data, 70% pass the MOT (a 30% failure rate), with about 2.1 faults or advisories recorded per test.

The most frequently recorded Hyundai S coupe injection se a MOT issues are: Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d); Offside Front Brake pipe slightly corroded (3.6.B.2c); Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5).

The typical Hyundai S coupe injection se a in our data has covered around 79,906 miles.

Compare the Hyundai S coupe injection se a

See how the Hyundai S coupe injection se a stacks up against other Hyundai models on MOT reliability:

S coupe injection se a vs I10 S coupe injection se a vs I20 S coupe injection se a vs Tucson S coupe injection se a vs I30

Check a specific Hyundai S coupe injection se a

Enter a registration to see that exact vehicle's full MOT history, advisories and recurring faults.

See all Hyundai models · Learn about common MOT failures · what an MOT checks