Skip to content

MOT reliability

Mazda Bianti

1 vehicles · 7 completed MOT tests analysed
86%
MOT pass rate

Based on 1 Mazda Bianti vehicles and 7 completed MOT tests, the Mazda Bianti has an overall 86% pass rate, with an average recorded mileage of 195,203 miles.

1
Vehicles
7
MOT tests
5.7
Faults per test
2%
Dangerous-fault share

Mazda Bianti problem areas

Where faults occur most across all Mazda Bianti MOT tests:

  • Tyres, wheels & suspension30%
  • Brakes22%
  • Steering20%
  • Lamps & electrical10%
  • Emissions & nuisance10%
  • Other8%

Mazda Bianti pass rate by age

Age (years)TestsPass rate
131100%
141100%
151100%
161100%
171100%
18250%

Fuel types: Petrol (1)

Most common Mazda Bianti MOT faults

These are the faults and advisories recorded most often across Mazda Bianti MOT tests:

  1. Front Brake pad(s) wearing thin (1.1.13 (a) (ii)) (5 times)
  2. Oil leak, but not excessive (8.4.1 (a) (i)) (4 times)
  3. Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both sides (2.1.3 (g) (i)) (3 times)
  4. Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e)) (2 times)
  5. Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b)) (2 times)
  6. Rear Brake pad(s) wearing thin (1.1.13 (a) (ii)) (2 times)
  7. Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b)) (2 times)
  8. Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i)) (2 times)
  9. Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i)) (2 times)
  10. Nearside Rear Nail in tyre (2 times)
  11. Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i)) (2 times)
  12. Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i)) (2 times)
  13. Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i)) (2 times)
  14. Anti-roll bar linkage ball joint has slight play n/s and o/s front (5.3.4 (a) (i)) (1 times)
  15. Brake pad(s) wearing thin front and rear pads n/s and o/s getting low (1.1.13 (a) (ii)) (1 times)

Mazda Bianti pass rate by registration year

YearVehiclesTestsPass rateAvg mileage
2008 1 7 86% 195,203

Mazda Bianti reliability FAQ

Across 1 Mazda Bianti vehicles in our MOT data, 86% pass the MOT (a 14% failure rate), with about 5.7 faults or advisories recorded per test.

The most frequently recorded Mazda Bianti MOT issues are: Front Brake pad(s) wearing thin (1.1.13 (a) (ii)); Oil leak, but not excessive (8.4.1 (a) (i)); Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both sides (2.1.3 (g) (i)).

The typical Mazda Bianti in our data has covered around 195,203 miles.

Compare the Mazda Bianti

See how the Mazda Bianti stacks up against other Mazda models on MOT reliability:

Bianti vs 3 Bianti vs Mx-5 Bianti vs 6 Bianti vs 2

Check a specific Mazda Bianti

Enter a registration to see that exact vehicle's full MOT history, advisories and recurring faults.

See all Mazda models · Learn about common MOT failures · what an MOT checks