MOT reliability
Mazda Bongo multi
1 vehicles · 27 completed MOT tests analysed
59%
MOT pass rate
Based on 1 Mazda Bongo multi vehicles and 27 completed MOT tests, the Mazda Bongo multi has an overall 59% pass rate, with an average recorded mileage of 177,735 miles.
1
Vehicles
27
MOT tests
3,851
Avg miles / year
4
Faults per test
2%
Dangerous-fault share
Mazda Bongo multi problem areas
Where faults occur most across all Mazda Bongo multi MOT tests:
-
Other57%
-
Tyres, wheels & suspension21%
-
Brakes10%
-
Body & structure7%
-
Seatbelts & equipment6%
-
Visibility3%
-
Emissions & nuisance2%
-
Identification & plates2%
Mazda Bongo multi pass rate by age
| Age (years) | Tests | Pass rate |
|---|---|---|
| 1 | 1 | 100% |
| 2 | 2 | 50% |
| 3 | 1 | 100% |
| 4 | 2 | 50% |
| 5 | 2 | 50% |
| 6 | 2 | 50% |
| 8 | 2 | 50% |
| 9 | 2 | 50% |
| 10 | 2 | 50% |
| 11 | 2 | 50% |
| 12 | 2 | 50% |
| 13 | 2 | 100% |
| 14 | 2 | 50% |
| 17 | 2 | 50% |
Fuel types: Diesel (1)
Most common Mazda Bongo multi MOT faults
These are the faults and advisories recorded most often across Mazda Bongo multi MOT tests:
- Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a) (6 times)
- Offside Front Headlamp deteriorated but light output not reduced (1.7.5a) (6 times)
- Rear Exhaust has a minor leak of exhaust gases (7.1.2) (2 times)
- Offside Rear Tyre worn close to the legal limit (4.1.E.1) (2 times)
- Engine covers fitted obscuring some components in the engine bay (2 times)
- Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2) (2 times)
- Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2) (2 times)
- Under-trays fitted obscuring some underside components (2 times)
- Nearside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive SILL AREA UNDERSIDE (2.4.A.3) (2 times)
- Offside Rear Outer Body has slight corrosion WHEEL ARCH AREA (6.1.B.2) (2 times)
- Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive INNER SILL AREA UNDERSIDE (2.4.A.3) (2 times)
- Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive INNER SILL AREA UNDERSIDE (2.4.A.3) (2 times)
- Nearside Seat belt anchorage prescribed area is corroded but not considered excessive INNER SILL AREA UNDERSIDE (5.2.6) (2 times)
- Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive SILL AREA (2.4.A.3) (2 times)
- Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive INNER SILL AREA UNDERSIDE (2.4.A.3) (2 times)
Mazda Bongo multi pass rate by registration year
| Year | Vehicles | Tests | Pass rate | Avg mileage |
|---|---|---|---|---|
| 2006 | 1 | 27 | 59% | 177,735 |
Mazda Bongo multi reliability FAQ
Across 1 Mazda Bongo multi vehicles in our MOT data,
59% pass the MOT (a 41% failure rate), with about
4 faults or advisories recorded per test.
The most frequently recorded Mazda Bongo multi MOT issues are:
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a); Offside Front Headlamp deteriorated but light output not reduced (1.7.5a); Rear Exhaust has a minor leak of exhaust gases (7.1.2).
The typical Mazda Bongo multi in our data has covered around
177,735 miles.
Compare the Mazda Bongo multi
See how the Mazda Bongo multi stacks up against other Mazda models on MOT reliability:
Check a specific Mazda Bongo multi
Enter a registration to see that exact vehicle's full MOT history, advisories and recurring faults.
See all Mazda models · Learn about common MOT failures · what an MOT checks