MOT reliability
Mercedes-benz 709 d
1 vehicles · 10 completed MOT tests analysed
60%
MOT pass rate
Based on 1 Mercedes-benz 709 d vehicles and 10 completed MOT tests, the Mercedes-benz 709 d has an overall 60% pass rate, with an average recorded mileage of 186,654 miles.
1
Vehicles
10
MOT tests
5.6
Faults per test
2%
Dangerous-fault share
Mercedes-benz 709 d problem areas
Where faults occur most across all Mercedes-benz 709 d MOT tests:
-
Tyres, wheels & suspension29%
-
Body & structure21%
-
Other14%
-
Lamps & electrical12%
-
Steering9%
-
Brakes9%
-
Emissions & nuisance5%
-
Seatbelts & equipment2%
Fuel types: Diesel (1)
Most common Mercedes-benz 709 d MOT faults
These are the faults and advisories recorded most often across Mercedes-benz 709 d MOT tests:
- Nearside Front Leaf spring has slight wear in a shackle pin and/or bush Rear bush (5.3.4 (a) (i)) (2 times)
- Offside Front Leaf spring has slight wear in a shackle pin and/or bush Rear bush (5.3.4 (a) (i)) (2 times)
- Oil leak, but not excessive Engine (8.4.1 (a) (i)) (2 times)
- Rear tyres cracked and perished but not deep enough to reach cord or ply Advised replacement asap (2 times)
- Various corrosion spots on body but all outside prescribed areas (2 times)
- Parking brake efficiency below requirements (1.4.2 (a) (i)) (2 times)
- Corrosion to body. outside prescribed areas (2 times)
- Fuel tank slightly loose rear bolt missing, tank still secure (6.1.3 (a) (i)) (2 times)
- Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i)) (2 times)
- Offside Rear Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii)) (2 times)
- Propshaft centre bearing rubber bonding failing. (2 times)
- Integral body structure is corroded but structural rigidity is not significantly reduced General all over underbody corrosion,(All outside prescribed area's) (6.1.1 (c) (i)) (2 times)
- Offside Rear Outer Tyre slightly damaged/cracking or perishing Perishing on sidewall (5.2.3 (d) (ii)) (2 times)
- Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) (1 times)
- Integral body structure is corroded but structural rigidity is not significantly reduced Various corrosion spots all over body and all outside prescribed area's (6.1.1 (c) (i)) (1 times)
Mercedes-benz 709 d pass rate by registration year
| Year | Vehicles | Tests | Pass rate | Avg mileage |
|---|---|---|---|---|
| 1987 | 1 | 10 | 60% | 186,654 |
Mercedes-benz 709 d reliability FAQ
Across 1 Mercedes-benz 709 d vehicles in our MOT data,
60% pass the MOT (a 40% failure rate), with about
5.6 faults or advisories recorded per test.
The most frequently recorded Mercedes-benz 709 d MOT issues are:
Nearside Front Leaf spring has slight wear in a shackle pin and/or bush Rear bush (5.3.4 (a) (i)); Offside Front Leaf spring has slight wear in a shackle pin and/or bush Rear bush (5.3.4 (a) (i)); Oil leak, but not excessive Engine (8.4.1 (a) (i)).
The typical Mercedes-benz 709 d in our data has covered around
186,654 miles.
Compare the Mercedes-benz 709 d
See how the Mercedes-benz 709 d stacks up against other Mercedes-benz models on MOT reliability:
Check a specific Mercedes-benz 709 d
Enter a registration to see that exact vehicle's full MOT history, advisories and recurring faults.
See all Mercedes-benz models · Learn about common MOT failures · what an MOT checks