Skip to content

MOT reliability

Peugeot Pulsion 125 rs lc abs

33 vehicles · 89 completed MOT tests analysed
80%
MOT pass rate

Based on 33 Peugeot Pulsion 125 rs lc abs vehicles and 89 completed MOT tests, the Peugeot Pulsion 125 rs lc abs has an overall 80% pass rate, with an average recorded mileage of 10,170 miles.

33
Vehicles
89
MOT tests
3,048
Avg miles / year
1.1
Faults per test
16%
Dangerous-fault share

Peugeot Pulsion 125 rs lc abs problem areas

Where faults occur most across all Peugeot Pulsion 125 rs lc abs MOT tests:

  • Brakes48%
  • Tyres, wheels & suspension37%
  • Lamps & electrical13%
  • Steering6%
  • Other4%
  • Body & structure2%

Peugeot Pulsion 125 rs lc abs pass rate by age

How the Peugeot Pulsion 125 rs lc abs's MOT pass rate changes as it ages (buckets with 20+ tests).

Age (years)TestsPass rate
21100%
32979%
42681%
52181%
61275%

Fuel types: Petrol (33)

Most common Peugeot Pulsion 125 rs lc abs MOT faults

These are the faults and advisories recorded most often across Peugeot Pulsion 125 rs lc abs MOT tests:

  1. Front Brake pad(s) close to minimum limit (1.1.13 (a)) (7 times)
  2. Rear Brake pad(s) close to minimum limit (1.1.13 (a)) (6 times)
  3. Front Brake excessively binding (1.2.1 (f)) (5 times)
  4. Rear Tyre worn close to the legal limit (5.2.3 (e)) (5 times)
  5. Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) (5 times)
  6. Front Brake disc worn, but not excessively (1.1.14 (a) (i)) (5 times)
  7. Front Tyre worn close to the legal limit (5.2.3 (e)) (4 times)
  8. Nearside Rear Shock absorber has a light misting of oil (5.3.2 (b)) (4 times)
  9. Rear Brake disc worn, but not excessively (1.1.14 (a) (i)) (4 times)
  10. Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) (3 times)
  11. Front Brake binding but not excessively (1.2.1 (f)) (3 times)
  12. Offside Rear Shock absorber has a reduced damping effect (5.3.2 (b)) (3 times)
  13. Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d)) (3 times)
  14. Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) (2 times)
  15. Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) (2 times)

Peugeot Pulsion 125 rs lc abs pass rate by registration year

YearVehiclesTestsPass rateAvg mileage
2022 1 2 50% 2,325
2021 5 14 86% 10,177
2020 12 44 77% 10,514
2019 10 29 83% 10,539

Peugeot Pulsion 125 rs lc abs reliability FAQ

Across 33 Peugeot Pulsion 125 rs lc abs vehicles in our MOT data, 80% pass the MOT (a 20% failure rate), with about 1.1 faults or advisories recorded per test.

The most frequently recorded Peugeot Pulsion 125 rs lc abs MOT issues are: Front Brake pad(s) close to minimum limit (1.1.13 (a)); Rear Brake pad(s) close to minimum limit (1.1.13 (a)); Front Brake excessively binding (1.2.1 (f)).

The typical Peugeot Pulsion 125 rs lc abs in our data has covered around 10,170 miles.

Compare the Peugeot Pulsion 125 rs lc abs

See how the Peugeot Pulsion 125 rs lc abs stacks up against other Peugeot models on MOT reliability:

Pulsion 125 rs lc abs vs 206 Pulsion 125 rs lc abs vs 306 Pulsion 125 rs lc abs vs 307 Pulsion 125 rs lc abs vs 106

Check a specific Peugeot Pulsion 125 rs lc abs

Enter a registration to see that exact vehicle's full MOT history, advisories and recurring faults.

See all Peugeot models · Learn about common MOT failures · what an MOT checks