MOT reliability
Peugeot Tepee m p v
1 vehicles · 21 completed MOT tests analysed
62%
MOT pass rate
Based on 1 Peugeot Tepee m p v vehicles and 21 completed MOT tests, the Peugeot Tepee m p v has an overall 62% pass rate, with an average recorded mileage of 116,199 miles.
1
Vehicles
21
MOT tests
7,186
Avg miles / year
3
Faults per test
0%
Dangerous-fault share
Peugeot Tepee m p v problem areas
Where faults occur most across all Peugeot Tepee m p v MOT tests:
-
Tyres, wheels & suspension35%
-
Lamps & electrical29%
-
Other17%
-
Brakes14%
-
Visibility8%
-
Body & structure6%
Peugeot Tepee m p v pass rate by age
| Age (years) | Tests | Pass rate |
|---|---|---|
| 3 | 1 | 100% |
| 4 | 2 | 50% |
| 5 | 1 | 100% |
| 6 | 2 | 50% |
| 7 | 2 | 50% |
| 8 | 1 | 100% |
| 9 | 1 | 100% |
| 10 | 2 | 50% |
| 11 | 1 | 100% |
| 12 | 2 | 50% |
| 13 | 2 | 50% |
| 14 | 2 | 50% |
| 15 | 2 | 50% |
Fuel types: Diesel (1)
Most common Peugeot Tepee m p v MOT faults
These are the faults and advisories recorded most often across Peugeot Tepee m p v MOT tests:
- Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i)) (4 times)
- Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i)) (4 times)
- Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i)) (4 times)
- Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i)) (3 times)
- Nearside Rear Direction indicator slightly discoloured (4.4.3 (a)) (3 times)
- Offside Rear Direction indicator slightly discoloured (4.4.3 (a)) (3 times)
- rear box and pipe of exhaust corroded slight blow. (2 times)
- Offside Front tyre cut in tread, no cords visable (2 times)
- Nearside Front Side repeater lens defective which has no effect on emitted light lens cracked (4.4.1 (b) (i)) (2 times)
- Brake pad(s) wearing thin front and back (1.1.13 (a) (ii)) (2 times)
- Front Brake disc worn, but not excessively (1.1.14 (a) (i)) (2 times)
- Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i)) (2 times)
- Offside Front Coil spring corroded (5.3.1 (b) (i)) (2 times)
- Offside Stop lamp(s) not working (4.3.1 (a) (ii)) (2 times)
- Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i)) (2 times)
Peugeot Tepee m p v pass rate by registration year
| Year | Vehicles | Tests | Pass rate | Avg mileage |
|---|---|---|---|---|
| 2011 | 1 | 21 | 62% | 116,199 |
Peugeot Tepee m p v reliability FAQ
Across 1 Peugeot Tepee m p v vehicles in our MOT data,
62% pass the MOT (a 38% failure rate), with about
3 faults or advisories recorded per test.
The most frequently recorded Peugeot Tepee m p v MOT issues are:
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i)); Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i)); Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i)).
The typical Peugeot Tepee m p v in our data has covered around
116,199 miles.
Compare the Peugeot Tepee m p v
See how the Peugeot Tepee m p v stacks up against other Peugeot models on MOT reliability:
Check a specific Peugeot Tepee m p v
Enter a registration to see that exact vehicle's full MOT history, advisories and recurring faults.
See all Peugeot models · Learn about common MOT failures · what an MOT checks