Skip to content

MOT reliability

Triumph Mk2 2.5 pi

1 vehicles · 8 completed MOT tests analysed
75%
MOT pass rate

Based on 1 Triumph Mk2 2.5 pi vehicles and 8 completed MOT tests, the Triumph Mk2 2.5 pi has an overall 75% pass rate, with an average recorded mileage of 29,198 miles.

1
Vehicles
8
MOT tests
1,549
Avg miles / year
2.9
Faults per test
0%
Dangerous-fault share

Triumph Mk2 2.5 pi problem areas

Where faults occur most across all Triumph Mk2 2.5 pi MOT tests:

  • Other100%
  • Steering9%
  • Seatbelts & equipment4%

Fuel types: Petrol (1)

Most common Triumph Mk2 2.5 pi MOT faults

These are the faults and advisories recorded most often across Triumph Mk2 2.5 pi MOT tests:

  1. Front registration plate deteriorated but not likely to be misread (6.3.1d) (2 times)
  2. nearside front inner wing to to front panel has corrosion but not in a prescribed area (2 times)
  3. Brake pipe slightly corroded (3.6.B.2c) (1 times)
  4. Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3) (1 times)
  5. Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3) (1 times)
  6. Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3) (1 times)
  7. Nearside Rear rear brake binding (3.7.B.1) (1 times)
  8. Offside Rear rear parking brake recording little or no effort (3.7.B.6a) (1 times)
  9. Parking brake: efficiency below requirements (3.7.B.7) (1 times)
  10. Exhaust has a minor leak of exhaust gases (7.1.2) (1 times)
  11. Offside Front Shock absorber has a serious fluid leak (2.7.3) (1 times)
  12. Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) (1 times)
  13. Offside Rear Brake pipe excessively corroded (3.6.B.2c) (1 times)
  14. Offside Rear Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.4.G.4e) (1 times)
  15. Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) (1 times)

Triumph Mk2 2.5 pi pass rate by registration year

YearVehiclesTestsPass rateAvg mileage
1972 1 8 75% 29,198

Triumph Mk2 2.5 pi reliability FAQ

Across 1 Triumph Mk2 2.5 pi vehicles in our MOT data, 75% pass the MOT (a 25% failure rate), with about 2.9 faults or advisories recorded per test.

The most frequently recorded Triumph Mk2 2.5 pi MOT issues are: Front registration plate deteriorated but not likely to be misread (6.3.1d); nearside front inner wing to to front panel has corrosion but not in a prescribed area; Brake pipe slightly corroded (3.6.B.2c).

The typical Triumph Mk2 2.5 pi in our data has covered around 29,198 miles.

Compare the Triumph Mk2 2.5 pi

See how the Triumph Mk2 2.5 pi stacks up against other Triumph models on MOT reliability:

Mk2 2.5 pi vs Toledo Mk2 2.5 pi vs Unknown Mk2 2.5 pi vs 2000 Mk2 2.5 pi vs 1500

Check a specific Triumph Mk2 2.5 pi

Enter a registration to see that exact vehicle's full MOT history, advisories and recurring faults.

See all Triumph models · Learn about common MOT failures · what an MOT checks