Skip to content

MOT reliability

Triumph Tr6 injection

1 vehicles · 13 completed MOT tests analysed
92%
MOT pass rate

Based on 1 Triumph Tr6 injection vehicles and 13 completed MOT tests, the Triumph Tr6 injection has an overall 92% pass rate, with an average recorded mileage of 39,049 miles.

1
Vehicles
13
MOT tests
71
Avg miles / year
0.4
Faults per test
0%
Dangerous-fault share

Triumph Tr6 injection problem areas

Where faults occur most across all Triumph Tr6 injection MOT tests:

  • Other100%
  • Seatbelts & equipment20%

Fuel types: Petrol (1)

Most common Triumph Tr6 injection MOT faults

These are the faults and advisories recorded most often across Triumph Tr6 injection MOT tests:

  1. Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3) (1 times)
  2. Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3) (1 times)
  3. free play in st rack / oil leaks from diff/ front/ rear anti roll bar bushes are perishing / exh system appears hanging low / part of design . same as when new / rear no plate starting to degalvanize (1 times)
  4. Exhaust system not adequately supported (7.1.1) (1 times)
  5. Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2) (1 times)
  6. Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2) (1 times)

Triumph Tr6 injection pass rate by registration year

YearVehiclesTestsPass rateAvg mileage
1971 1 13 92% 39,049

Triumph Tr6 injection reliability FAQ

Across 1 Triumph Tr6 injection vehicles in our MOT data, 92% pass the MOT (a 8% failure rate), with about 0.4 faults or advisories recorded per test.

The most frequently recorded Triumph Tr6 injection MOT issues are: Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3); Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3); free play in st rack / oil leaks from diff/ front/ rear anti roll bar bushes are perishing / exh system appears hanging low / part of design . same as when new / rear no plate starting to degalvanize.

The typical Triumph Tr6 injection in our data has covered around 39,049 miles.

Compare the Triumph Tr6 injection

See how the Triumph Tr6 injection stacks up against other Triumph models on MOT reliability:


Check a specific Triumph Tr6 injection

Enter a registration to see that exact vehicle's full MOT history, advisories and recurring faults.

See all Triumph models · Learn about common MOT failures · what an MOT checks