Skip to content

MOT reliability

Kawasaki Bn125-a2

15 vehicles · 18 completed MOT tests analysed
67%
MOT pass rate

Based on 15 Kawasaki Bn125-a2 vehicles and 18 completed MOT tests, the Kawasaki Bn125-a2 has an overall 67% pass rate, with an average recorded mileage of 9,869 miles.

15
Vehicles
18
MOT tests
1,375
Avg miles / year
0.7
Faults per test
0%
Dangerous-fault share

Kawasaki Bn125-a2 problem areas

Where faults occur most across all Kawasaki Bn125-a2 MOT tests:

  • Other100%
  • Brakes15%
  • Steering8%

Kawasaki Bn125-a2 pass rate by age

Age (years)TestsPass rate
41100%
5250%
6475%
7560%
81100%
91100%
13250%
14250%

Fuel types: Petrol (15)

Most common Kawasaki Bn125-a2 MOT faults

These are the faults and advisories recorded most often across Kawasaki Bn125-a2 MOT tests:

  1. Drive chain worn but not considered excessive (6.2.1e) (2 times)
  2. Front Headlamp aim too high and too far to the right. (1.6) (1 times)
  3. Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii)) (1 times)
  4. Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i)) (1 times)
  5. Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i)) (1 times)
  6. Front Front position lamp does not illuminate immediately when switched on (1.1.3a) (1 times)
  7. Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) (1 times)
  8. Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) (1 times)
  9. Rear Front position lamp does not illuminate immediately when switched on (1.1.3a) (1 times)
  10. Stop lamp does not illuminate immediately a brake applies (1.3.1a) (1 times)
  11. Front Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.2) (1 times)
  12. Front Floor brake test indicates a sticking brake (3.3.C2c) (1 times)
  13. Steering movement excessively 'notchy' with the wheel raised (2.2.1b) (1 times)
  14. Rear Rear position lamp incorrect colour (1.1.2b) (1 times)
  15. Nearside Front shock absorber has light misting of stanchion (2.3.3) (1 times)

Kawasaki Bn125-a2 pass rate by registration year

YearVehiclesTestsPass rateAvg mileage
2003 1 3 67% 11,416
2000 3 8 75% 11,545
1999 2 7 57% 6,582

Kawasaki Bn125-a2 reliability FAQ

Across 15 Kawasaki Bn125-a2 vehicles in our MOT data, 67% pass the MOT (a 33% failure rate), with about 0.7 faults or advisories recorded per test.

The most frequently recorded Kawasaki Bn125-a2 MOT issues are: Drive chain worn but not considered excessive (6.2.1e); Front Headlamp aim too high and too far to the right. (1.6); Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii)).

The typical Kawasaki Bn125-a2 in our data has covered around 9,869 miles.

Compare the Kawasaki Bn125-a2

See how the Kawasaki Bn125-a2 stacks up against other Kawasaki models on MOT reliability:


Check a specific Kawasaki Bn125-a2

Enter a registration to see that exact vehicle's full MOT history, advisories and recurring faults.

See all Kawasaki models · Learn about common MOT failures · what an MOT checks